Dynamic weighing
Ability to weigh a train dynamically, without the need to stop the train, and being able to perform the weighing at any speed. The accuracy of railFOM's force signals, make it a very high-performance system for train weighing, either statically or dynamically.
Speed
Detection of the speed of a train passing through the measurement zone. The system measures the time spent between two different points, separated by a known distance, and calculates the speed. The very high quality signals provided by the system, make it possible to carry out a very accurate time measurement, obtaining an absolutely reliable speed indication.
ADVANTAGES
The advantages railFOM provides, comparing with other systems, are the following:
- Short installation time, with no need to cut or lift the track for installation.
- Nearly no maintenance, excepting unusual circumstances.
- In case a repair or part replacement is needed, easy maintenance and repair, by non-expert staff.
- Easy data display. Warnings in case any train doesn't comply with the user requirements. Force peak and unbalancing alarms.
- Very high quality signals Currently no other system can provide the signal cleanliness nor the time accuracy provided by railFOM.
- Low cost. Easy installation and maintenance at a low price.
FEATURES
- Minimum axle distance
- No restriction
- Static & Dynamic weighing accuracy
- < 3%
- Maximum Train Speed
- No restriction
- Power supply
- 230VAC 50Hz / 10-30VDC. UPS
- Train types
- All
- Rail profile
- All (adjustable)
- Subgrade
- All (ballast, slab)
- Sleeper Type
- All (concrete, wood)
- Operating Temperature
- -40°C / 70°C
- Communication
- Ethernet
- Train Detection
- RFID
- Sensor Dimensions
- 70 x 45 mm
- Cover Box Dimensions
- 200 x 80 mm
- Maximum load
- No restriction
- Alarms
- Overload, Unbalance, Peak Force, etc.